Pre-Set "Clicker"

Interchangeable Head Wrenches



PART
NUMBER
TORQUE RANGE
in./ft. lb. dNm / Nm cmkg / mkg
DR.
SIZE
A B C WT.
5T - I 16 - 60 in. lb. 14 - 67 dNm 14 - 69 cmkg J 11/16" 5/8" 6" 6 oz.
10T - I 36 - 108 in. lb. 40 - 122 dNm 42 - 124 cmkg J 11/16" 7/8" 6" 11 oz.
10ST - I 84 - 300 in. lb. 95 - 338 dNm 110 - 385 cmkg J 11/16" 7/8" 6 1/8" 12 oz.
10AT - I 84 - 300 in. lb. 95 - 338 dNm 110 - 385 cmkg J 11/16" 7/8" 7" 13 oz.
50ST - I 10 - 50 ft. lb. 14 - 67 Nm 1.4 - 7 mkg J 11/16" 7/8" 9 1/8" 17 oz.
50T - I 10 - 50 ft. lb. 14 - 67 Nm 1.4 - 7 mkg J 11/16" 7/8" 11" 20 oz.
100ST - I 30 - 150 ft. lb. 41 - 200 Nm 4.1 - 20 mkg Y 15/16" 7/8" 14 1/4" 1 lb. 12 oz.
100T - I 30 - 150 ft. lb. 41 - 200 Nm 4.1 - 20 mkg Y 15/16" 7/8" 19 1/4" 2 lb. 4 oz.
200T - I 40 - 200 ft. lb. 55 - 270 Nm 5.5 - 27 mkg Y 15/16" 7/8" 23 3/8" 2 lb. 10 oz.
300T - I 60 - 300 ft. lb. 82 - 400 Nm 8.2 - 40 mkg X 1 1/8" 1" 27 1/2" 3 lb. 14 oz.
600T - I 200 - 600 ft. lb. 275 - 800 Nm 27.5 - 135 mkg Z* 1 5/16" 1 1/4" 55" 10 lb. 8 oz.
*Z shank drive heads available on special request - call customer service for available sizes.
Note: Hex key size for adjusting torque (not included)

5T=3/32"

10T, 10th, 10AT, 50th, 100th, 100T AND 200T=1/8"

300T and 600T=3/16"


Accuracy: This style of wrench meets or exceeds ANSI/ASME B107.14M - 1994, 4% right and 6% left.


Interchangeable Head Drives for Pre-Sets

Note: The 2nd letter in the part number indicates drive size. The drive size must match with the torque wrench handle. Example: Wrench 50T-I has "J" drive. 1" open end wrench would be RJE-16

Plain Drive Ratchet Drives Open End Drives
PART NO. OPENING PART NO. OPENING PART NO. OPENING PART NO. OPENING
RJP-4* 1/4" RJD-4* 1/4" RJE-4 1/4" RYE-12 3/4"
RJP-6* 3/8" RJD-6* 3/8" RJE-5 5/16" RYE-13 13/16"
RJP-8* 3/8" RJD-8* 1/2" RJE-6* 3/8" RYE-14* 7/8"
RYP-8* 1/2" RYD-8* 1/2" RJE-7 7/16" RYE-15* 15/16"
RYP-12* 3/4" RXD-8 1/2" RJE-8* 1/2" RYE-16* 1"
RXP-8* 1/2" RXD-12 3/4" RJE-9* 9/16"* RYE-17 1 1/16"
RXP-12 3/4"     RJE-10* 5/8" RYE-18 1 1/8"
RXP-16 1"     RJE-11* 11/16" RYE-20 1 1/4"
        RJE-12 3/4" RYE-21 1 5/16"
        RJE-13 13/16" RYE-22 1 3/8"
        RJE-14 7/8" RYE-23 1 7/16"
        RJE-15 15/16" RXE-20* 1 1/4"
        RJE-16* 1" RXE-21 1 5/16"
        RJE-17 1 1/16" RXE-22* 1 3/8"
        RJE-18 1 1/8" RXE-23 1 7/16"
        RJE-20 1 1/4" RXE-24 1 1/2"
            RXE-26* 1 5/8"
            RXE-27* 1 11/16"
            RXE-28 1 3/4"
FLARE NUT DRIVES 15 DEGREE BOX DRIVE
PART NO. OPENING PART NO. OPENING PART NO. OPENING PART NO. OPENING
RJR-6 3/8" RYR-10* 5/8" RJB-6 3/8" RYB-10* 5/8"
RJ7-T* 7/16" RYR-11 11/16" RJB-T* 7/16" RYB-11 11/16"
RJR-8* 1/2" RYR-12 3/4" RJB-8* 1/2" RYB-12 3/4"
RJR-9 9/16" RYR-14 7/8" RJB-9 9/16" RYB-14 7/8"
RJR-10 5/8" RYR-15 15/16" RJB-10 5/8" RYB-15 15/16"
RJR-11* 11/16" RYR-16 1" RJB-11* 11/16" RYB-16 1"
RJR-12 3/4" RYR-18 1-1'8" RJB-12 3/4" RYB-18 1-1/8"
RJR-14 7/8" RYR-20 1-1/4" RJB-14 7/8"    
RJR-15* 15/16" RYR-21 1-5/16" RJB-15* 15/16" RYB-21 1-5/16"
RJR-16 1" RYR-22 1-3/8" RJB-16 1" RYB-22 1-3/8"
    RYR-24 1-1/2"     RYB-23 1-7/16"
            RYB-24* 1-1/2"
               
               
               
               
               
               
               

 


Back to Index

National Torque Tools Home Page