Multitorq

Torque and Data Aquisition


 

The MULTITORQ portable electronic torque analyzer displays torque readings from sensors that attach between sockets and driver. MULTITORQ is a highly versatile torque analyzer/data acquisition system that can be used with sockets, extensions, universal joints, racheting drivers and any combination of these. Sensors purchased separately, are available in 8 ranges from 2-20 in. oz., to 150-1500 ft.lb., and provide readings with an accuracy of better than 1 percent.

The torque analyzer features a wide angle viewing LCD display with selectable readouts in ft. lb., in. lb., Nm. dNm, mKg, and cmKg units, depending upon the sensor in use.

Torque analyzer settings are entered on a push button membrane keyboard. High and low torque limits are adjustable to give an audible and visual alarm. The user selects Track mode to display torque values as they are applied, or Peak mode to display the highest torque valued applied.

The torque analyzer stores and recalls up to 3500 readings and provides SPC statistical analysis output. Both RS-232 and Mitutoyo serial communication is available for printer and computer interfacing.

the torque analyzer operates from an internal rechargeable NiCad battery or directly from a battery charger powered by the AC line. A sensor idle and display sleep mode conserve battery power.

Torque limits are indicated on dual LED and audible indicators. An audio output jack permits the use of head phones in a noisy environment. A belt clip on the back of the meter leaves both hands free when working portable.

The torque analyzer and the optional sensors can be calibrated by the user with a known torque input. A special memory chip, built into the sensor, identifies the sensors range and calibration parameters to any MULTITORQ torque analyzer.


MULTITORQ Torque and Data Analyzing Features:


Back to Index

National Torque Tools Home Page