ETT - Electronic Torque Testers
- Integral transducer and sturdy housing allow mounting in virtually any
position
- Unique neck design allows operator to see display when testing long torque
wrenches
- Accuracy better than .5% of indicated value (10-100% of full range of
transducer)
- Peak mode
- Power tool mode (non-impacting)
- First Peak mode
- Track mode
- Dual scale (English/nM or English/cNm, dNm)
- Auto/ Manual display reset
- Reads bi-directionally (C. W. and C.C.W.)
- Rechargeable NiCad batteries
- Designed to be a sturdy, low cost tester, ETT can be placed on the wall in
the factory or on a bench to allow operators to test torque wrenches or power
tools without having to leave their station.
| PART NUMBER |
RANGE ENGLISH |
RANGE N/M |
DRIVE SIZE |
WEIGHT |
| 1001-O-ETT |
10-100 in. oz. |
7.0 - 70.6 cNm |
1/4" |
4.5 lb. |
| 4001-0-ETT |
40-400 in. oz. |
28-280 cNm |
1/4" |
4.5" |
| 501-I-ETT |
5-50 in. lb. |
5.6-56 dNm |
1/4" |
4.5 lb. |
| 1001-I-ETT |
10 -100 in. lb. |
11.3 - 113 dNm |
1/4" |
4.5 |
| 2502-I-ETT |
25-250 in. lb. |
28-280 dNm |
3/8" |
4.5 lb. |
| 10002-I-ETT |
100-1000 in. lb. |
113-1130 dNm |
3/8" |
4.5 lb. |
| 2503-F-ETT |
25-250 ft. lb. |
34-339 Nm |
1/2" |
4.5 lb. |
| 6004-F-ETT |
60-600 ft. lb. |
81-813 Nm |
3/4" |
5.0 lb. |
Use joint simulator with Power Tool mode
Power adapter cord included - Part # P115-30
Bench bracket available - Part # TBM-343
Socket adapter included with tester (female to female)
Back to
Index
National Torque Tools
Home Page