Dial Torque Wrenches



Dial Torque Wrenches from 3 in. lbs. to 2,000ft. lbs.



Memory Needle and Electric Dials


Shown at left, the Memory Needle Dial acts as an indicator of how much torque has been applied. The pointer needle returns to zero but the memory needle remains at the highest applied torque value.



Shown at right is the Electric Dial. The operator can preset a desired torque value. When the pointer needle reaches the pre-set torque value, the light is illuminated and a buzzer sounds.



Accuracy: This style of wrench meets or exceeds ANSI/ASME B107.14M - 1994, 4% right and 4% left.

 

Dial Type

CDI Dial Torque Wrenches are "state of the art" torque wrenches.

Torsion beam design provides long life and accuracy.

Special ranges and drive sizes available upon request. Call customer service for availability at (800) 525-6319

DUAL SCALE: INCH POUND / NEWTON METER

PART NO.
FOLLOWER
NEEDLE		 PART NO.
ELECTRIC		 TORQUE
RANGE
in. lb.		 GRADS.
in. lb.		 TORQUE
RANGE
Nm		 GRADS.
Nm		 DRIVE LENGTH NO. OF
EXT.
HANDLES		 WT.
LBS.
151LDIN
0 - 15 in. lb. .25 in. lb. 0 -18 dNm .25 dNm 1/4" 10"
1
301LDIN
0 - 30 in. lb. .5 in. lb. 0 - 3.5 Nm .1 Nm 1/4" 10"
1
751LDIN
0 - 75 in. lb. 1 in. lb. 0 -9 Nm .2 Nm 1/4" 10"
1
752LDIN
0 - 75 in. lb. 1 in. lb. 0 -9 Nm .2 Nm 3/8" 10"
1
1502LDIN
0 - 150 in. lb. 2 in. lb. 0 -18 Nm .5 Nm 3/8" 10"
1
2502LDIN
0 - 250 in. lb. 5 in. lb. 0 -30 Nm .5 Nm 3/8" 10"
1
3002LDIN
0 - 300 in. lb. 5 in. lb. 0 -35 Nm 1 Nm 3/8" 10"
1
6002LDIN 6002LDIE 0 - 600 in. lb. 10 in. lb. 0 -70 Nm 2 Nm 3/8" 14 7/8"
1 3/4
DUAL SCALE: FOOT POUND / NEWTON METER
252LDFN
0 - 25 ft. lb. .25 ft. lb. 0 -35 Nm 1 Nm 3/8" 10"
1
502LDFN 502LFDE 0 - 50 ft. lb. 1 ft. lb. 0 - 70 Nm 2 Nm 3/8" 14 7/8"
1 3/4
1003LDFN 1003LFDE 0 - 100 ft. lb. 2 ft. lb. 0 - 140 Nm 2.5 Nm 1/2" 21 1/2"
2 3/4
1753LDFN 1753LFDE 0 - 175 ft. lb. 5 ft. lb. 0 - 240 Nm 5 Nm 1/2" 21 1/2"
2 3/4
2503LDFN 2503LFDE 0 - 250 ft. lb. 5 ft. lb. 0 - 350 Nm 10 Nm 1/2" 21 1/2"
2 3/4
2503LDFNR* 2503LDFER* 0 - 250 ft. lb. 5 ft. lb. 0 - 350 Nm 10 Nm 1/2"
ratchet 		23 1/2"
3
3504LDFN** 3504LDFE** 0 - 350 ft. lb. 10 ft. lb. 0 - 480 Nm 10 Nm 3/4" 27 7/8"
5 3/4
6004LDFN** 6004LDFE** 0 - 600 ft. lb. 10 ft. lb. 0 - 800 Nm 20 Nm 3/4" 46 1/2" 1 9 1/4
10005LDFN 10005LDFE 0 - 1000 ft. lb. 20 ft. lb. 0 - 1400 Nm 25 Nm 1" 74" 1 30

 20005LDFE*** 0 - 2000 ft. lb. 40 ft. lb. 0 - 2800 Nm 50 Nm 1" 122" 5 47
* Ratchet Head
** Available with wire guard, add "W" to end of part number . Example: 3504LDFNW
*** 'T' style wrench, 1" drive female head for use with torque multiplier

All wrenches shipped in plastic storage box or metal case (except 2000 ft. lb.)

2000 ft. wrenches are shipped in cardboard containers.

Note:

Some wrenches have the option of adding an electric light and audible buzzer (See chart above, "PART NO. ELECTRIC"). An operator may elect to preset a torque value on the dial face of the torque wrench prior to torquing. During the torquing of the fastener, the pointer needle of the wrench makes contact with the pre-set brass contact needle and a red light and buzzer sounds, indicating the pre-set torque value has been reached.

Dial Type with Metric Scales

DUAL SCALE: cmkg / in. lb.

PART NO.
FOLLOWER
NEEDLE		 TORQUE
RANGE
cmkg		 GRADS.
cmkg		 TORQUE
RANGE
in. lb.		 GRADS.
in. lb.		 DRIVE
SIZE		 LENGTH
INCHES		 WT.
LBS.
301 KLDN 0 - 35 1 0 -30 .5 1/4" 10" 1
751 KLDN 0 - 90 2 0 -75 1 1/4" 10" 1
1502 KLDIN 0 - 175 5 0 - 150 2 3/8" 10" 1
2502 KLDIN 0 - 280 5 0 - 250 5 3/8" 10" 1
6002 KLDIN 0 - 700 20 0 - 600 10 3/8" 14 7/8' 1.75
502 KLDFN 0 - 7 .2 0 - 50 1 3/8" 14 7/8" 1.75
1003 KLDFN 0 - 14 .25 0 - 100 2 1/2" 14 7/8" 1.75
1753 KLDFN 0 - 25 .5 0 - 175 5 1/2" 21 1/2" 2.75
2503 KLDFN 0 - 35 1 0 - 250 5 1/2" 21 1/2" 2.75
3504 KLDFN 0 - 50 1 0 - 350 10 3/4" 27 7/8" 5.75
6004 KLDFN 0 - 80 2 0 - 600 10 3/4" 461/2" * 9.25
10005 KLDFN 0 - 140 2 0 - 1000 20 1" 74" * 30
20005 KLDFN 0 - 280 5 0 - 2000 40 1" 122" ** 47
* 1 Extension Handle
** 5 Extension Handles

 

Interchangeable Drive Dial Wrenches



Add versatility to your dial wrench applications. Reach those hard-to-reach fasteners using an open-end, box end or flare nut attachment. To add speed to your torquing, select the ratchet head. Any way you do it, the interchangeable drive feature gives you many more options.

DUAL SCALE: INCH POUND / NEWTON METER

PART
NO.		 TORQUE
RANGE
ENGLISH		 GRADS
ENGLISH		 TORQUE
RANGE
METRIC		 GRADS
METRIC		 FEMALE
DRIVE
SIZE		 LENGTH
INCHES		 WT.
LBS.
75 LDINI 0 - 75 in. lb. 1 in. lb. 0 -9 Nm .2 Nm 9 x 12 mm 11" 1 1/4
150 LDINI 0 - 150 in. lb. 2.5 in. lb. 0 -13 Nm .5 Nm 9 x 12 mm 11" 1 1/4
600 LDINI 0 - 600 in. lb. 10 in. lb. 0 -70 Nm 2 Nm 9 x 12 mm 11" 2
DUAL SCALE: FOOT POUND / NEWTON METER
100 LDFNI 0 - 100 ft. lb. 2 ft. lb. 0 -140 Nm 2.5 Nm 14 x 18 mm 24" 3
175 LDFNI 0 - 175 ft. lb. 5 ft. lb. 0 -240 Nm 5 Nm 14 x 18 mm 24" 3
250 LDFNI 0 - 250 ft. lb. 5 ft. lb. 0 -350 Nm 10 Nm 14 x 18 mm 24" 3

 

Back to Index

National Torque Tools Home Page