TorcUP designs and manufactures the most advanced line of Hydraulic Bolting Tools available. Each tool provides users with the most safe, accurate and compact means of tightening and loosening threaded fasteners.
At the end of every job the real measure of any Hydraulic Torque Wrench is how it performs... over time. At TorcUP every Wrench that bears our name has undergone a battery of brutal physical and environmental torture tests. Our Wrenches perform where it really counts... ON THE JOB!The Performer!
Heavy Duty and Lightweight are rarely used to describe a Hydraulic Wrench. However, the TU is just that tool.
Time is Money ... TU Wrenches Save You BOTH!
| TU-2 | TU-3 | TU-5 | TU-10 | TU-27 | |
|
|
|||||
| Length 1 (in) | 4.68 | 6.10 | 8.00 | 9.21 | 12.29 |
| Length 2 (in) | 6.20 | 8.10 | 10.74 | 12.21 | 16.29 |
| Height (in) | 4.20 | 5.30 | 6.99 | 7.79 | 10.19 |
| Width 1 (in) | 2.00 | 2.62 | 3.61 | 3.93 | 5.26 |
| Width 2 (in) | 2.76 | 3.68 | 5.06 | 5.43 | 7.73 |
| Width 3 (in) | 4.42 | 5.81 | 7.98 | 8.72 | 11.63 |
| Radius (in) | 0.98 | 1.30 | 1.70 | 1.95 | 2.43 |
| Weight (lbs) | 3.9 | 9 | 19 | 29 | 70 |
| Output (ft/lbs) | 1,270 | 3,330 | 7,170 | 9,420 | 27,200 |
| Output (NM) | 1,720 | 4,515 | 9,720 | 12,770 | 36,875 |
We
Don't Need To Say We Are No. 1
BECAUSE OUR
CUSTOMERS DO!
TorcUP TX Low Clearance Series
The Solution!
Customers asked for it, and we produced it... THE FLAT TOOL!
Attach our cylinder to our hex link with a pin and put this tool where a socket cannot even fit.
| TX-2 | TX-4 | TX-8 | TX-16 | TX-32 | |
|
|
|||||
| Length (in) | 5.67 | 7.80 | 9.80 | 11.90 | 15.30 |
| Height (in) | 4.00 | 5.60 | 7.00 | 8.50 | 10.90 |
| Width (in) | 1.25 | 1.63 | 2.05 | 2.45 | 3.24 |
| Radius (in) | 0.36 | 0.46 | 0.54 | 0.76 | 0.93 |
| Output (ft/lbs) | 1,930 | 3,950 | 8,630 | 15,600 | 31,600 |
| Output (NM) | 2,615 | 5,355 | 11,700 | 21,250 | 42,840 |
| Hex Size [min] (in) | 3/4 | 1 | 1 7/8 | 2 5/8 | 3 1/8 |
| Hex Size [max] (in) | 2 3/8 | 3 1/8 | 4 | 4 5/8 | 6 1/8 |
| Hex Size [min] (mm) | 19 | 25 | 50 | 65 | 80 |
| Hex Size [max] (mm) | 60 | 80 | 90 | 115 | 155 |
Weight is determined by Hex Link Size
We Don't
Need To Say We Are No. 1
BECAUSE OUR
CUSTOMERS DO!
TorcUP Hydraulic Power Pumps & Accessories
TorcUP Sets a New Standard in 10,000 PSI Pumps in Construction and Reliability
At the heart of the TorcUP pump is the field proven Clydesdale Technology. A close coupled motor and one-piece Clydesdale chassis combine to offer a rigid unit with minimal flex and wear characterisitics. Traditional pumps consist of various components bolted together, and are more susceptible to internal leakage, overheating and expensive repair.
Cool running continuous duty Clydesdale pump
Powerful 1.5HP permanent magnet motor
115V and 230V available
Starts under full load
Runs on reduced voltage
Quiet operation (approx. 80 dBA @ 10,000 PSI)
Rugged remote pendant to control motor and valve
Easily adjustable pressure control knob
Auto-Dump relieves all pressure from hoses
Completely enclosed motor housing and electronics
2 Gallon oil reservoir
Precise PSI/BAR pressure gauge
Quick-Connect No-Drip Couplers with Safety Locking Collar
Dual Non-Conductive High Pressure Hose with couplers
Cool running continuous duty Clydesdale pump
Powerful 1.5HP continuous duty air motor
Runs on 50 cfm of air
Quiet operation
Rugged remote pendant to control motor and valve
Easily adjustable pressure control knob
Auto-Dump relieves all pressure from hoses
Rugged roll cage for pump protection and ease of handling
Filter-Lubricator for long and trouble free operation
2 Gallon oil reservoir
Precise PSI/BAR pressure gauge
Quick-Connect No-Drip Couplers with Safety Locking Collar
Dual Non-Conductive High Pressure Hose with couplers
Cool running continuous duty Clydesdale pump
Powerful 1.5HP permanent magnet motor
115V and 230V available
Starts under full load
Runs on reduced voltage
Quiet operation (approx. 80 dBA @ 10,000 PSI)
Rugged remote pendant to control motor and valve
Easily adjustable pressure control knob
Auto-Dump relieves all pressure from hoses
Completely enclosed motor housing and electronics
1 Gallon oil reservoir
Precise PSI/BAR pressure gauge
Quick-Connect No-Drip Couplers with Safety Locking Collar
Dual Non-Conductive High Pressure Hose with couplers
Options for TorcUP Pumps
3HP, 5HP and gasoline powered models available
5 Gallon oil reservoir for extended oil life and reducing oil temperature
Roll cage for EP1000 and EP500
Heat exchanger with external filter to keep pump running cool and oil clean to 20 microns for EP1000 and EP500
Multi-port manifold for multiple tool operation
Longer hose lengths for operation of tool further from pump location
Wheeled pump cart
Accessories
Custom Tooling
Digital Guages For Increased Accuracy |
Filter/Lubricator/Regulator For Use with AP640 Air Pump |
|||
| |
||||
Twinline Hydraulic Hoses in all Lengths |
Custom Tool and Pump Cases |
|||
| |
||||
|
|
||||
We Don't
Need To Say We Are No. 1
BECAUSE OUR
CUSTOMERS DO!
National
Torque Tools Home Page
