National Torque Tools Logo

National Torque Tools

Telarc Q-Base Logo

Telarc Q-Base Certified reg. no. 610

National Torque Tools NZ Ltd.
PO.Box 58039, Botany 2163, Auckland, New Zealand
Unit 11/15 Bishop Lenihan Place, Botany South, 
Manukau City, Auckland, New Zealand

Ph. & Fax ++64-9-271 3355 Mobile ++64-21-974 812

About us

National Torque Tools Pty Ltd. began operations in Australia about 1982, selling and servicing Torque Equipment. The New Zealand operation was set up in 1991 as a branch of the parent company in Australia. I joined the Company as Branch Manager in 1995. My background was initially in aircraft engineering and subsequently in engineering equipment sales. Indoctrination included training at the factory of Consolidated Devices Inc. in Los Angeles and Stanley Hydraulic Tools in Portland. This training covered all aspects of repair and calibration of the CDI & Stanley range of products.

In June 1996 an opportunity arose which resulted in the purchase the New Zealand Branch. A new company, National Torque Tools NZ Ltd., was formed to effect this purchase. The Stanley & CDI agencies have continued under the new ownership.

The torque test capabilities have been expanded to cover Tension & Force testing with the investment in additional equipment. Testing and repairs are carried out on all brands of torque equipment including torque multipliers. Telarc Q-Base certification was gained in 1998 as part of the companies ongoing commitment to improving quality & services. The Company's operation includes sales and service/repair of Pneumatic and Hydraulic tools, with the emphasis on the top end of the market with high quality products. We also track down and source those hard to find and unusual products for specialist applications. A Hire service was introduced recently to cater for specialist markets and the company's line up boasts the largest range of underwater tools available on the NZ market.

S H Gutry

Managing Director


Check here for updates


Darda EP Powerpack

Ex Demo unit

1.5 kW 3 phase electric motor.

2.3 l/min @ 500 bar. 5 litre oil tank - suitable for 1 to 2 cylinders.

460 x 400 x 500 mm high. 40 Kg weight.

NZD $1500.00 (GST if applicable is extra)

Repairs, Calibrations & Services

Hydraulic & Pneumatic Tools, Torque Multipliers

Torque Wrenches & Testers

On Site Hydraulic Bolt Tightening

We are a Telarc Q-Base Certified Company

Hire Equipment

Stanley Hydraulic Tools & Power Packs, Hydraulic Equipment

Hydraulic Cylinders & Pumps

Torque Wrenches

Hydraulic Torque Wrenches

Torque Multipliers

Pneumatic Tools

(See list of equipment in Reference section below)


Stanley Hydraulic Tools

See Reference section below
for additional information.

Air Compressor, Alternator, Breakers, Cable Cutter, Chain Saws, Chipping Hammer, Circle Saw, Crimping Tools, Cut-Off Saws, Diamond Chain Saws, Digger, Drills, Earth Auger, Grinders, Ground Rod Driver, Hammer Drills, Impact Wrenches, Pole Chain Saws, Post Driver, Post Puller, Power Units, Pruner, Pumps, Saw Cart, Sinker Drill, Tampers, Trash Pumps, Vent Fan

FleetHydrol Portapower

Flat Jacks, Low Profile Cylinders, Single-Acting Cylinders, Pull Cylinder, Hydraulic Wedges, Hand Pumps - Single & Double Acting, Air-Hydraulic Pumps, Electric Pumps, Panel Beating Hydraulics, Hydraulic Kits, Wheel Dollie, Scissor Lifts, Transmission Jacks & Hoists, Cranes, Folding Cranes, ForkLift Jack, Presses - Bench & Floor, C-Presses

CDI Torque Equipment

Multitest Calibrator, Digitest Calibrator, Suretest Calibrator, ETT Torque Testers, Transducers, Calibration Equipment, Multitorq Data Acquisition, Programmable Electronic Torque Wrenches, Computorq Digital Electronic Torque Wrenches, Electronic Torque Loaders, Torque Multipliers, Dial Wrenches, Micrometer Wrenches, Torque Angle Gauge, Electronic Torque Multipliers, Pre-Set Torque Wrenches, Torque Screwdrivers, Torkys, Beam Torque Wrenches, Mechanical Torque Testers & Loaders

Seekonk Torque Equipment

Mechanical Torque Analyzers, Pre-set "T" Handle Tools, Torque Screwdrivers, Beam Wrenches

Warren & Brown Torque Wrenches

Dual-Signal Torque Wrenches

Norbar Torque Equipment

Professional, Slimline & Industrial torque wrenches. Spanner end fittings. Highwayman, Handtorque, Pneutorque, Electrotorque & Hyspan hydraulic torque multipliers.

TorcUp Hydraulic Torque Wrenches

TorcUp Square Drive & Low Profile Hydraulic Torque Wrenches.

Torque Multipliers

CDI Digital & Mechanical. Norbar Mechanical - Pnuematic - Hydraulic.

Pneumatic Tools

Desoutter, Ingersoll-Rand


Hydraulic hoses & couplings, Hydraulic oil, Drill bits, Breaker moil points & chisels

If you have any specific requests for products or services
not listed here, we want to hear about them

Please e-mail us at:


Click on the links to View.
Use your Browser back arrow to return to this page

Product group


Stanley Hydraulic Tools

Frequently asked questions

Advantages of Hydraulic Tools

Hire Equipment

Equipment list

Terms of Hire



Torque Converter



Bolt Calculations