Upate: I had to remove the full-size pictures to make way for other things,
so most of these links are now broken, sorry about that. They're getting
a bit out of date now anyway.
The front suspension A-arms begin to take shape on the bench.
The front part of the frame has been rebuilt in lighter material.
This is how the back half should look when assembled. Approximately.
A quick check to make sure the vehicle isn't going to be too long.
Jesse indicates where the roll-cage will be.
I only took one photo of the electrics and it came out all fuzzy.
Sorry about that.
After we cleaned up the terminals on the controller and hooked up
some proper cables instead of trying to do everything with jumper
leads, the controller works. This is the small controller - we need
another battery or two to test the larger one.
